Class: Thread

Inherits:
Object show all
Defined in:
vm.c,
vm.c

Overview

Threads are the Ruby implementation for a concurrent programming model.

Programs that require multiple threads of execution are a perfect candidate for Ruby’s Thread class.

For example, we can create a new thread separate from the main thread’s execution using ::new.

thr = Thread.new { puts "What's the big deal" }

Then we are able to pause the execution of the main thread and allow our new thread to finish, using #join:

thr.join #=> "What's the big deal"

If we don’t call thr.join before the main thread terminates, then all other threads including thr will be killed.

Alternatively, you can use an array for handling multiple threads at once, like in the following example:

threads = []
threads << Thread.new { puts "What's the big deal" }
threads << Thread.new { 3.times { puts "Threads are fun!" } }

After creating a few threads we wait for them all to finish consecutively.

   threads.each { |thr| thr.join }

To retrieve the last value of a thread, use #value

    thr = Thread.new { sleep 1; "Useful value" }
    thr.value #=> "Useful value"

Thread initialization

In order to create new threads, Ruby provides ::new, ::start, and ::fork. A block must be provided with each of these methods, otherwise a ThreadError will be raised.

When subclassing the Thread class, the initialize method of your subclass will be ignored by ::start and ::fork. Otherwise, be sure to call super in your initialize method.

=== Thread termination

For terminating threads, Ruby provides a variety of ways to do this.

The class method ::kill, is meant to exit a given thread:

thr = Thread.new { sleep }
Thread.kill(thr) # sends exit() to thr

Alternatively, you can use the instance method #exit, or any of its aliases #kill or #terminate.

thr.exit

=== Thread status

Ruby provides a few instance methods for querying the state of a given thread. To get a string with the current thread’s state use #status

thr = Thread.new { sleep }
thr.status # => "sleep"
thr.exit
thr.status # => false

You can also use #alive? to tell if the thread is running or sleeping, and #stop? if the thread is dead or sleeping.

=== Thread variables and scope

Since threads are created with blocks, the same rules apply to other Ruby blocks for variable scope. Any local variables created within this block are accessible to only this thread.

==== Fiber-local vs. Thread-local

Each fiber has its own bucket for Thread#[] storage. When you set a new fiber-local it is only accessible within this Fiber. To illustrate:

Thread.new {
  Thread.current[:foo] = "bar"
  Fiber.new {
    p Thread.current[:foo] # => nil
  }.resume
}.join

This example uses #[] for getting and #[]= for setting fiber-locals, you can also use #keys to list the fiber-locals for a given thread and #key? to check if a fiber-local exists.

When it comes to thread-locals, they are accessible within the entire scope of the thread. Given the following example:

Thread.new{
  Thread.current.thread_variable_set(:foo, 1)
  p Thread.current.thread_variable_get(:foo) # => 1
  Fiber.new{

Thread.current.thread_variable_set(:foo, 2) p Thread.current.thread_variable_get(:foo) # => 2

     }.resume
     p Thread.current.thread_variable_get(:foo)   # => 2
   }.join

You can see that the thread-local +:foo+ carried over into the fiber
and was changed to +2+ by the end of the thread.

This example makes use of #thread_variable_set to create new
thread-locals, and #thread_variable_get to reference them.

There is also #thread_variables to list all thread-locals, and
#thread_variable? to check if a given thread-local exists.

=== Exception handling

When an unhandled exception is raised inside a thread, it will
terminate. By default, this exception will not propagate to other
threads. The exception is stored and when another thread calls #value
or #join, the exception will be re-raised in that thread.

    t = Thread.new{ raise 'something went wrong' }
    t.value #=> RuntimeError: something went wrong

An exception can be raised from outside the thread using the
Thread#raise instance method, which takes the same parameters as
Kernel#raise.

Setting Thread.abort_on_exception = true, Thread#abort_on_exception =
true, or $DEBUG = true will cause a subsequent unhandled exception
raised in a thread to be automatically re-raised in the main thread.

With the addition of the class method ::handle_interrupt, you can now handle exceptions asynchronously with threads.

=== Scheduling

Ruby provides a few ways to support scheduling threads in your program.

The first way is by using the class method ::stop, to put the current running thread to sleep and schedule the execution of another thread.

Once a thread is asleep, you can use the instance method #wakeup to mark your thread as eligible for scheduling.

You can also try ::pass, which attempts to pass execution to another thread but is dependent on the OS whether a running thread will switch or not. The same goes for #priority, which lets you hint to the thread scheduler which threads you want to take precedence when passing execution. This method is also dependent on the OS and may be ignored on some platforms.

Direct Known Subclasses

Process::Waiter

Defined Under Namespace

Classes: Backtrace

Class Method Summary collapse

Instance Method Summary collapse

Constructor Details

#initialize(args) ⇒ Object

:nodoc:



941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
 
# File 'thread.c', line 941

static VALUE
thread_initialize(VALUE thread, VALUE args)
{
    rb_thread_t *th = rb_thread_ptr(thread);

    if (!rb_block_given_p()) {
        rb_raise(rb_eThreadError, "must be called with a block");
    }
    else if (th->invoke_type != thread_invoke_type_none) {
        VALUE loc = threadptr_invoke_proc_location(th);
        if (!NIL_P(loc)) {
            rb_raise(rb_eThreadError,
                     "already initialized thread - %"PRIsVALUE":%"PRIsVALUE,
                     RARRAY_AREF(loc, 0), RARRAY_AREF(loc, 1));
        }
        else {
            rb_raise(rb_eThreadError, "already initialized thread");
        }
    }
    else {
        return thread_create_core(thread, args, NULL);
    }
}

Class Method Details

.abort_on_exception ⇒ Boolean

Returns the status of the global “abort on exception” condition.

The default is false.

When set to true, if any thread is aborted by an exception, the raised exception will be re-raised in the main thread.

Can also be specified by the global $DEBUG flag or command line option -d.

See also ::abort_on_exception=.

There is also an instance level method to set this for a specific thread, see #abort_on_exception.

Returns:

  • (Boolean) 


2736
2737
2738
2739
2740
 
# File 'thread.c', line 2736

static VALUE
rb_thread_s_abort_exc(VALUE _)
{
    return GET_THREAD()->vm->thread_abort_on_exception ? Qtrue : Qfalse;
}

.abort_on_exception=(boolean) ⇒ Boolean

When set to true, if any thread is aborted by an exception, the raised exception will be re-raised in the main thread. Returns the new state.

Thread.abort_on_exception = true
t1 = Thread.new do
  puts  "In new thread"
  raise "Exception from thread"
end
sleep(1)
puts "not reached"

This will produce:

In new thread
prog.rb:4: Exception from thread (RuntimeError)
	from prog.rb:2:in `initialize'
	from prog.rb:2:in `new'
	from prog.rb:2

See also ::abort_on_exception.

There is also an instance level method to set this for a specific thread, see #abort_on_exception=.

Returns:

  • (Boolean) 


2773
2774
2775
2776
2777
2778
 
# File 'thread.c', line 2773

static VALUE
rb_thread_s_abort_exc_set(VALUE self, VALUE val)
{
    GET_THREAD()->vm->thread_abort_on_exception = RTEST(val);
    return val;
}

.current ⇒ Object

Returns the currently executing thread.

Thread.current   #=> #<Thread:0x401bdf4c run>



2690
2691
2692
2693
2694
 
# File 'thread.c', line 2690

static VALUE
thread_s_current(VALUE klass)
{
    return rb_thread_current();
}

.DEBUG ⇒ Numeric

Returns the thread debug level. Available only if compiled with THREAD_DEBUG=-1.

Returns:



306
307
308
309
310
 
# File 'thread.c', line 306

static VALUE
rb_thread_s_debug(void)
{
    return INT2NUM(rb_thread_debug_enabled);
}

.DEBUG=(num) ⇒ Object

Sets the thread debug level. Available only if compiled with THREAD_DEBUG=-1.



320
321
322
323
324
325
 
# File 'thread.c', line 320

static VALUE
rb_thread_s_debug_set(VALUE self, VALUE val)
{
    rb_thread_debug_enabled = RTEST(val) ? NUM2INT(val) : 0;
    return val;
}

.exit ⇒ Object

Terminates the currently running thread and schedules another thread to be run.

If this thread is already marked to be killed, ::exit returns the Thread.

If this is the main thread, or the last thread, exit the process.



2515
2516
2517
2518
2519
2520
 
# File 'thread.c', line 2515

static VALUE
rb_thread_exit(VALUE _)
{
    rb_thread_t *th = GET_THREAD();
    return rb_thread_kill(th->self);
}

.start([args]) {|args| ... } ⇒ Object .fork([args]) {|args| ... } ⇒ Object

Basically the same as ::new. However, if class Thread is subclassed, then calling start in that subclass will not invoke the subclass’s initialize method.

Overloads:

  • .start([args]) {|args| ... } ⇒ Object

    Yields:

    • (args)
  • .fork([args]) {|args| ... } ⇒ Object

    Yields:

    • (args) 


923
924
925
926
927
 
# File 'thread.c', line 923

static VALUE
thread_start(VALUE klass, VALUE args)
{
    return thread_create_core(rb_thread_alloc(klass), args, 0);
}

.handle_interrupt(hash) { ... } ⇒ Object

Changes asynchronous interrupt timing.

interrupt means asynchronous event and corresponding procedure by Thread#raise, Thread#kill, signal trap (not supported yet) and main thread termination (if main thread terminates, then all other thread will be killed).

The given hash has pairs like ExceptionClass => :TimingSymbol. Where the ExceptionClass is the interrupt handled by the given block. The TimingSymbol can be one of the following symbols:

:immediate

Invoke interrupts immediately.

:on_blocking

Invoke interrupts while BlockingOperation.

:never

Never invoke all interrupts.

BlockingOperation means that the operation will block the calling thread, such as read and write. On CRuby implementation, BlockingOperation is any operation executed without GVL.

Masked asynchronous interrupts are delayed until they are enabled. This method is similar to sigprocmask(3).

NOTE

Asynchronous interrupts are difficult to use.

If you need to communicate between threads, please consider to use another way such as Queue.

Or use them with deep understanding about this method.

Usage

In this example, we can guard from Thread#raise exceptions.

Using the :never TimingSymbol the RuntimeError exception will always be ignored in the first block of the main thread. In the second ::handle_interrupt block we can purposefully handle RuntimeError exceptions.

th = Thread.new do
  Thread.handle_interrupt(RuntimeError => :never) {
    begin
      # You can write resource allocation code safely.
      Thread.handle_interrupt(RuntimeError => :immediate) {
   # ...
      }
    ensure
      # You can write resource deallocation code safely.
    end
  }
end
Thread.pass
# ...
th.raise "stop"

While we are ignoring the RuntimeError exception, it’s safe to write our resource allocation code. Then, the ensure block is where we can safely deallocate your resources.

Guarding from Timeout::Error

In the next example, we will guard from the Timeout::Error exception. This will help prevent from leaking resources when Timeout::Error exceptions occur during normal ensure clause. For this example we use the help of the standard library Timeout, from lib/timeout.rb

require 'timeout'
Thread.handle_interrupt(Timeout::Error => :never) {
  timeout(10){
    # Timeout::Error doesn't occur here
    Thread.handle_interrupt(Timeout::Error => :on_blocking) {
      # possible to be killed by Timeout::Error
      # while blocking operation
    }
    # Timeout::Error doesn't occur here
  }
}

In the first part of the timeout block, we can rely on Timeout::Error being ignored. Then in the Timeout::Error => :on_blocking block, any operation that will block the calling thread is susceptible to a Timeout::Error exception being raised.

Stack control settings

It’s possible to stack multiple levels of ::handle_interrupt blocks in order to control more than one ExceptionClass and TimingSymbol at a time.

Thread.handle_interrupt(FooError => :never) {
  Thread.handle_interrupt(BarError => :never) {
     # FooError and BarError are prohibited.
  }
}

Inheritance with ExceptionClass

All exceptions inherited from the ExceptionClass parameter will be considered.

Thread.handle_interrupt(Exception => :never) {
  # all exceptions inherited from Exception are prohibited.
}

Yields:



2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
 
# File 'thread.c', line 2019

static VALUE
rb_thread_s_handle_interrupt(VALUE self, VALUE mask_arg)
{
    VALUE mask;
    rb_execution_context_t * volatile ec = GET_EC();
    rb_thread_t * volatile th = rb_ec_thread_ptr(ec);
    volatile VALUE r = Qnil;
    enum ruby_tag_type state;

    if (!rb_block_given_p()) {
	rb_raise(rb_eArgError, "block is needed.");
    }

    mask = 0;
    mask_arg = rb_to_hash_type(mask_arg);
    rb_hash_foreach(mask_arg, handle_interrupt_arg_check_i, (VALUE)&mask);
    if (!mask) {
	return rb_yield(Qnil);
    }
    OBJ_FREEZE_RAW(mask);
    rb_ary_push(th->pending_interrupt_mask_stack, mask);
    if (!rb_threadptr_pending_interrupt_empty_p(th)) {
	th->pending_interrupt_queue_checked = 0;
	RUBY_VM_SET_INTERRUPT(th->ec);
    }

    EC_PUSH_TAG(th->ec);
    if ((state = EC_EXEC_TAG()) == TAG_NONE) {
	r = rb_yield(Qnil);
    }
    EC_POP_TAG();

    rb_ary_pop(th->pending_interrupt_mask_stack);
    if (!rb_threadptr_pending_interrupt_empty_p(th)) {
	th->pending_interrupt_queue_checked = 0;
	RUBY_VM_SET_INTERRUPT(th->ec);
    }

    RUBY_VM_CHECK_INTS(th->ec);

    if (state) {
	EC_JUMP_TAG(th->ec, state);
    }

    return r;
}

.kill(thread) ⇒ Object

Causes the given thread to exit, see also Thread::exit.

count = 0
a = Thread.new { loop { count += 1 } }
sleep(0.1)       #=> 0
Thread.kill(a)   #=> #<Thread:0x401b3d30 dead>
count            #=> 93947
a.alive?         #=> false



2496
2497
2498
2499
2500
 
# File 'thread.c', line 2496

static VALUE
rb_thread_s_kill(VALUE obj, VALUE th)
{
    return rb_thread_kill(th);
}

.list ⇒ Array

Returns an array of Thread objects for all threads that are either runnable or stopped.

Thread.new { sleep(200) }
Thread.new { 1000000.times {|i| i*i } }
Thread.new { Thread.stop }
Thread.list.each {|t| p t}

This will produce:

#<Thread:0x401b3e84 sleep>
#<Thread:0x401b3f38 run>
#<Thread:0x401b3fb0 sleep>
#<Thread:0x401bdf4c run>

Returns:



2669
2670
2671
2672
2673
 
# File 'thread.c', line 2669

static VALUE
thread_list(VALUE _)
{
    return rb_thread_list();
}

.main ⇒ Object

Returns the main thread.



2709
2710
2711
2712
2713
 
# File 'thread.c', line 2709

static VALUE
rb_thread_s_main(VALUE klass)
{
    return rb_thread_main();
}

.new(*args) ⇒ Object

Thread.new(*args, &proc) -> thread

Thread.new(*args) { |args| ... }	-> thread

Creates a new thread executing the given block.

Any +args+ given to ::new will be passed to the block:

arr = [] a, b, c = 1, 2, 3 Thread.new(a,b,c) { |d,e,f| arr << d << e << f }.join arr #=> [1, 2, 3]

A ThreadError exception is raised if ::new is called without a block.

If you're going to subclass Thread, be sure to call super in your
+initialize+ method, otherwise a ThreadError will be raised.



895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
 
# File 'thread.c', line 895

static VALUE
thread_s_new(int argc, VALUE *argv, VALUE klass)
{
    rb_thread_t *th;
    VALUE thread = rb_thread_alloc(klass);

    if (GET_VM()->main_thread->status == THREAD_KILLED)
	rb_raise(rb_eThreadError, "can't alloc thread");

    rb_obj_call_init_kw(thread, argc, argv, RB_PASS_CALLED_KEYWORDS);
    th = rb_thread_ptr(thread);
    if (!threadptr_initialized(th)) {
	rb_raise(rb_eThreadError, "uninitialized thread - check `%"PRIsVALUE"#initialize'",
		 klass);
    }
    return thread;
}

.pass ⇒ nil

Give the thread scheduler a hint to pass execution to another thread. A running thread may or may not switch, it depends on OS and processor.

Returns:

  • (nil) 


1725
1726
1727
1728
1729
1730
 
# File 'thread.c', line 1725

static VALUE
thread_s_pass(VALUE klass)
{
    rb_thread_schedule();
    return Qnil;
}

.pending_interrupt?(error = nil) ⇒ Boolean

Returns whether or not the asynchronous queue is empty.

Since Thread::handle_interrupt can be used to defer asynchronous events, this method can be used to determine if there are any deferred events.

If you find this method returns true, then you may finish :never blocks.

For example, the following method processes deferred asynchronous events immediately.

def Thread.kick_interrupt_immediately
  Thread.handle_interrupt(Object => :immediate) {
    Thread.pass
  }
end

If error is given, then check only for error type deferred events.

Usage

th = Thread.new{
  Thread.handle_interrupt(RuntimeError => :on_blocking){
    while true
      ...
      # reach safe point to invoke interrupt
      if Thread.pending_interrupt?
        Thread.handle_interrupt(Object => :immediate){}
      end
      ...
    end
  }
}
...
th.raise # stop thread

This example can also be written as the following, which you should use to avoid asynchronous interrupts.

flag = true
th = Thread.new{
  Thread.handle_interrupt(RuntimeError => :on_blocking){
    while true
      ...
      # reach safe point to invoke interrupt
      break if flag == false
      ...
    end
  }
}
...
flag = false # stop thread

Returns:

  • (Boolean) 


2161
2162
2163
2164
2165
 
# File 'thread.c', line 2161

static VALUE
rb_thread_s_pending_interrupt_p(int argc, VALUE *argv, VALUE self)
{
    return rb_thread_pending_interrupt_p(argc, argv, GET_THREAD()->self);
}

.report_on_exception ⇒ Boolean

Returns the status of the global “report on exception” condition.

The default is true since Ruby 2.5.

All threads created when this flag is true will report a message on $stderr if an exception kills the thread.

Thread.new { 1.times { raise } }

will produce this output on $stderr:

#<Thread:...> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
        2: from -e:1:in `block in <main>'
        1: from -e:1:in `times'

This is done to catch errors in threads early. In some cases, you might not want this output. There are multiple ways to avoid the extra output:

  • If the exception is not intended, the best is to fix the cause of the exception so it does not happen anymore.

  • If the exception is intended, it might be better to rescue it closer to where it is raised rather then let it kill the Thread.

  • If it is guaranteed the Thread will be joined with Thread#join or Thread#value, then it is safe to disable this report with Thread.current.report_on_exception = false when starting the Thread. However, this might handle the exception much later, or not at all if the Thread is never joined due to the parent thread being blocked, etc.

See also ::report_on_exception=.

There is also an instance level method to set this for a specific thread, see #report_on_exception=.

Returns:

  • (Boolean) 


2866
2867
2868
2869
2870
 
# File 'thread.c', line 2866

static VALUE
rb_thread_s_report_exc(VALUE _)
{
    return GET_THREAD()->vm->thread_report_on_exception ? Qtrue : Qfalse;
}

.report_on_exception=(boolean) ⇒ Boolean

Returns the new state. When set to true, all threads created afterwards will inherit the condition and report a message on $stderr if an exception kills a thread:

Thread.report_on_exception = true
t1 = Thread.new do
  puts  "In new thread"
  raise "Exception from thread"
end
sleep(1)
puts "In the main thread"

This will produce:

In new thread
#<Thread:...prog.rb:2> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
prog.rb:4:in `block in <main>': Exception from thread (RuntimeError)
In the main thread

See also ::report_on_exception.

There is also an instance level method to set this for a specific thread, see #report_on_exception=.

Returns:

  • (Boolean) 


2903
2904
2905
2906
2907
2908
 
# File 'thread.c', line 2903

static VALUE
rb_thread_s_report_exc_set(VALUE self, VALUE val)
{
    GET_THREAD()->vm->thread_report_on_exception = RTEST(val);
    return val;
}

.start([args]) {|args| ... } ⇒ Object .fork([args]) {|args| ... } ⇒ Object

Basically the same as ::new. However, if class Thread is subclassed, then calling start in that subclass will not invoke the subclass’s initialize method.

Overloads:

  • .start([args]) {|args| ... } ⇒ Object

    Yields:

    • (args)
  • .fork([args]) {|args| ... } ⇒ Object

    Yields:

    • (args) 


923
924
925
926
927
 
# File 'thread.c', line 923

static VALUE
thread_start(VALUE klass, VALUE args)
{
    return thread_create_core(rb_thread_alloc(klass), args, 0);
}

.stop ⇒ nil

Stops execution of the current thread, putting it into a “sleep” state, and schedules execution of another thread.

a = Thread.new { print "a"; Thread.stop; print "c" }
sleep 0.1 while a.status!='sleep'
print "b"
a.run
a.join
#=> "abc"

Returns:

  • (nil) 


2621
2622
2623
2624
2625
 
# File 'thread.c', line 2621

static VALUE
thread_stop(VALUE _)
{
    return rb_thread_stop();
}

Instance Method Details

#[](sym) ⇒ Object?

Attribute Reference—Returns the value of a fiber-local variable (current thread’s root fiber if not explicitly inside a Fiber), using either a symbol or a string name. If the specified variable does not exist, returns nil.

[
  Thread.new { Thread.current["name"] = "A" },
  Thread.new { Thread.current[:name]  = "B" },
  Thread.new { Thread.current["name"] = "C" }
].each do |th|
  th.join
  puts "#{th.inspect}: #{th[:name]}"
end

This will produce:

#<Thread:0x00000002a54220 dead>: A
#<Thread:0x00000002a541a8 dead>: B
#<Thread:0x00000002a54130 dead>: C

Thread#[] and Thread#[]= are not thread-local but fiber-local. This confusion did not exist in Ruby 1.8 because fibers are only available since Ruby 1.9. Ruby 1.9 chooses that the methods behaves fiber-local to save following idiom for dynamic scope.

def meth(newvalue)
  begin
    oldvalue = Thread.current[:name]
    Thread.current[:name] = newvalue
    yield
  ensure
    Thread.current[:name] = oldvalue
  end
end

The idiom may not work as dynamic scope if the methods are thread-local and a given block switches fiber.

f = Fiber.new {
  meth(1) {
    Fiber.yield
  }
}
meth(2) {
  f.resume
}
f.resume
p Thread.current[:name]
#=> nil if fiber-local
#=> 2 if thread-local (The value 2 is leaked to outside of meth method.)

For thread-local variables, please see #thread_variable_get and #thread_variable_set.

Returns:



3281
3282
3283
3284
3285
3286
3287
 
# File 'thread.c', line 3281

static VALUE
rb_thread_aref(VALUE thread, VALUE key)
{
    ID id = rb_check_id(&key);
    if (!id) return Qnil;
    return rb_thread_local_aref(thread, id);
}

#[]=(sym) ⇒ Object

Attribute Assignment—Sets or creates the value of a fiber-local variable, using either a symbol or a string.

See also Thread#[].

For thread-local variables, please see #thread_variable_set and #thread_variable_get.

Returns:



3386
3387
3388
3389
3390
 
# File 'thread.c', line 3386

static VALUE
rb_thread_aset(VALUE self, VALUE id, VALUE val)
{
    return rb_thread_local_aset(self, rb_to_id(id), val);
}

#abort_on_exception ⇒ Boolean

Returns the status of the thread-local “abort on exception” condition for this thr.

The default is false.

See also #abort_on_exception=.

There is also a class level method to set this for all threads, see ::abort_on_exception.

Returns:

  • (Boolean) 


2796
2797
2798
2799
2800
 
# File 'thread.c', line 2796

static VALUE
rb_thread_abort_exc(VALUE thread)
{
    return rb_thread_ptr(thread)->abort_on_exception ? Qtrue : Qfalse;
}

#abort_on_exception=(boolean) ⇒ Boolean

When set to true, if this thr is aborted by an exception, the raised exception will be re-raised in the main thread.

See also #abort_on_exception.

There is also a class level method to set this for all threads, see ::abort_on_exception=.

Returns:

  • (Boolean) 


2816
2817
2818
2819
2820
2821
 
# File 'thread.c', line 2816

static VALUE
rb_thread_abort_exc_set(VALUE thread, VALUE val)
{
    rb_thread_ptr(thread)->abort_on_exception = RTEST(val);
    return val;
}

#add_trace_func(proc) ⇒ Proc

Adds proc as a handler for tracing.

See Thread#set_trace_func and Kernel#set_trace_func.

Returns:



551
552
553
554
555
556
 
# File 'vm_trace.c', line 551

static VALUE
thread_add_trace_func_m(VALUE obj, VALUE trace)
{
    thread_add_trace_func(GET_EC(), rb_thread_ptr(obj), trace);
    return trace;
}

#alive? ⇒ Boolean

Returns true if thr is running or sleeping.

thr = Thread.new { }
thr.join                #=> #<Thread:0x401b3fb0 dead>
Thread.current.alive?   #=> true
thr.alive?              #=> false

See also #stop? and #status.

Returns:

  • (Boolean) 


3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
 
# File 'thread.c', line 3061

static VALUE
rb_thread_alive_p(VALUE thread)
{
    if (rb_threadptr_dead(rb_thread_ptr(thread))) {
	return Qfalse;
    }
    else {
	return Qtrue;
    }
}

#backtrace ⇒ Array

Returns the current backtrace of the target thread.

Returns:



5123
5124
5125
5126
5127
 
# File 'thread.c', line 5123

static VALUE
rb_thread_backtrace_m(int argc, VALUE *argv, VALUE thval)
{
    return rb_vm_thread_backtrace(argc, argv, thval);
}

#backtrace_locations(*args) ⇒ Object

Returns the execution stack for the target thread—an array containing backtrace location objects.

See Thread::Backtrace::Location for more information.

This method behaves similarly to Kernel#caller_locations except it applies to a specific thread.



5140
5141
5142
5143
5144
 
# File 'thread.c', line 5140

static VALUE
rb_thread_backtrace_locations_m(int argc, VALUE *argv, VALUE thval)
{
    return rb_vm_thread_backtrace_locations(argc, argv, thval);
}

#exit ⇒ Object #kill ⇒ Object #terminate ⇒ Object

Terminates thr and schedules another thread to be run, returning the terminated Thread. If this is the main thread, or the last thread, exits the process.



2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
 
# File 'thread.c', line 2445

VALUE
rb_thread_kill(VALUE thread)
{
    rb_thread_t *th = rb_thread_ptr(thread);

    if (th->to_kill || th->status == THREAD_KILLED) {
	return thread;
    }
    if (th == th->vm->main_thread) {
	rb_exit(EXIT_SUCCESS);
    }

    thread_debug("rb_thread_kill: %p (%"PRI_THREAD_ID")\n", (void *)th, thread_id_str(th));

    if (th == GET_THREAD()) {
	/* kill myself immediately */
	rb_threadptr_to_kill(th);
    }
    else {
	threadptr_check_pending_interrupt_queue(th);
	rb_threadptr_pending_interrupt_enque(th, eKillSignal);
	rb_threadptr_interrupt(th);
    }
    return thread;
}

#fetch(sym) ⇒ Object #fetch(sym) { ... } ⇒ Object #fetch(sym, default) ⇒ Object

Returns a fiber-local for the given key. If the key can’t be found, there are several options: With no other arguments, it will raise a KeyError exception; if default is given, then that will be returned; if the optional code block is specified, then that will be run and its result returned. See Thread#[] and Hash#fetch.

Overloads:



3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
 
# File 'thread.c', line 3302

static VALUE
rb_thread_fetch(int argc, VALUE *argv, VALUE self)
{
    VALUE key, val;
    ID id;
    rb_thread_t *target_th = rb_thread_ptr(self);
    int block_given;

    rb_check_arity(argc, 1, 2);
    key = argv[0];

    block_given = rb_block_given_p();
    if (block_given && argc == 2) {
	rb_warn("block supersedes default value argument");
    }

    id = rb_check_id(&key);

    if (id == recursive_key) {
	return target_th->ec->local_storage_recursive_hash;
    }
    else if (id && target_th->ec->local_storage &&
	     st_lookup(target_th->ec->local_storage, id, &val)) {
	return val;
    }
    else if (block_given) {
	return rb_yield(key);
    }
    else if (argc == 1) {
	rb_key_err_raise(rb_sprintf("key not found: %+"PRIsVALUE, key), self, key);
    }
    else {
	return argv[1];
    }
}

#group ⇒ nil

Returns the ThreadGroup which contains the given thread, or returns nil if thr is not a member of any group.

Thread.main.group   #=> #<ThreadGroup:0x4029d914>

Returns:

  • (nil) 


2965
2966
2967
2968
2969
2970
 
# File 'thread.c', line 2965

VALUE
rb_thread_group(VALUE thread)
{
    VALUE group = rb_thread_ptr(thread)->thgroup;
    return group == 0 ? Qnil : group;
}

#join ⇒ Object #join(limit) ⇒ Object

The calling thread will suspend execution and run this thr.

Does not return until thr exits or until the given limit seconds have passed.

If the time limit expires, nil will be returned, otherwise thr is returned.

Any threads not joined will be killed when the main program exits.

If thr had previously raised an exception and the ::abort_on_exception or $DEBUG flags are not set, (so the exception has not yet been processed), it will be processed at this time.

a = Thread.new { print "a"; sleep(10); print "b"; print "c" }
x = Thread.new { print "x"; Thread.pass; print "y"; print "z" }
x.join # Let thread x finish, thread a will be killed on exit.
#=> "axyz"

The following example illustrates the limit parameter.

y = Thread.new { 4.times { sleep 0.1; puts 'tick... ' }}
puts "Waiting" until y.join(0.15)

This will produce:

tick...
Waiting
tick...
Waiting
tick...
tick...



1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
 
# File 'thread.c', line 1135

static VALUE
thread_join_m(int argc, VALUE *argv, VALUE self)
{
    VALUE limit;
    rb_hrtime_t rel, *to = 0;

    /*
     * This supports INFINITY and negative values, so we can't use
     * rb_time_interval right now...
     */
    if (!rb_check_arity(argc, 0, 1) || NIL_P(argv[0])) {
        /* unlimited */
    }
    else if (FIXNUM_P(limit = argv[0])) {
        rel = rb_sec2hrtime(NUM2TIMET(limit));
        to = &rel;
    }
    else {
        to = double2hrtime(&rel, rb_num2dbl(limit));
    }

    return thread_join(rb_thread_ptr(self), to);
}

#key?(sym) ⇒ Boolean

Returns true if the given string (or symbol) exists as a fiber-local variable.

me = Thread.current
me[:oliver] = "a"
me.key?(:oliver)    #=> true
me.key?(:stanley)   #=> false

Returns:

  • (Boolean) 


3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
 
# File 'thread.c', line 3467

static VALUE
rb_thread_key_p(VALUE self, VALUE key)
{
    ID id = rb_check_id(&key);
    st_table *local_storage = rb_thread_ptr(self)->ec->local_storage;

    if (!id || local_storage == NULL) {
	return Qfalse;
    }
    else if (st_is_member(local_storage, id)) {
	return Qtrue;
    }
    else {
	return Qfalse;
    }
}

#keys ⇒ Array

Returns an array of the names of the fiber-local variables (as Symbols).

thr = Thread.new do
  Thread.current[:cat] = 'meow'
  Thread.current["dog"] = 'woof'
end
thr.join   #=> #<Thread:0x401b3f10 dead>
thr.keys   #=> [:dog, :cat]

Returns:



3511
3512
3513
3514
3515
3516
3517
3518
3519
3520
3521
 
# File 'thread.c', line 3511

static VALUE
rb_thread_keys(VALUE self)
{
    st_table *local_storage = rb_thread_ptr(self)->ec->local_storage;
    VALUE ary = rb_ary_new();

    if (local_storage) {
	st_foreach(local_storage, thread_keys_i, ary);
    }
    return ary;
}

#exit ⇒ Object #kill ⇒ Object #terminate ⇒ Object

Terminates thr and schedules another thread to be run, returning the terminated Thread. If this is the main thread, or the last thread, exits the process.



2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
 
# File 'thread.c', line 2445

VALUE
rb_thread_kill(VALUE thread)
{
    rb_thread_t *th = rb_thread_ptr(thread);

    if (th->to_kill || th->status == THREAD_KILLED) {
	return thread;
    }
    if (th == th->vm->main_thread) {
	rb_exit(EXIT_SUCCESS);
    }

    thread_debug("rb_thread_kill: %p (%"PRI_THREAD_ID")\n", (void *)th, thread_id_str(th));

    if (th == GET_THREAD()) {
	/* kill myself immediately */
	rb_threadptr_to_kill(th);
    }
    else {
	threadptr_check_pending_interrupt_queue(th);
	rb_threadptr_pending_interrupt_enque(th, eKillSignal);
	rb_threadptr_interrupt(th);
    }
    return thread;
}

#name ⇒ String

show the name of the thread.

Returns:



3127
3128
3129
3130
3131
 
# File 'thread.c', line 3127

static VALUE
rb_thread_getname(VALUE thread)
{
    return rb_thread_ptr(thread)->name;
}

#name=(name) ⇒ String

set given name to the ruby thread. On some platform, it may set the name to pthread and/or kernel.

Returns:



3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
 
# File 'thread.c', line 3141

static VALUE
rb_thread_setname(VALUE thread, VALUE name)
{
    rb_thread_t *target_th = rb_thread_ptr(thread);

    if (!NIL_P(name)) {
	rb_encoding *enc;
	StringValueCStr(name);
	enc = rb_enc_get(name);
	if (!rb_enc_asciicompat(enc)) {
	    rb_raise(rb_eArgError, "ASCII incompatible encoding (%s)",
		     rb_enc_name(enc));
	}
	name = rb_str_new_frozen(name);
    }
    target_th->name = name;
    if (threadptr_initialized(target_th)) {
	native_set_another_thread_name(target_th->thread_id, name);
    }
    return name;
}

#pending_interrupt?(error = nil) ⇒ Boolean

Returns whether or not the asynchronous queue is empty for the target thread.

If error is given, then check only for error type deferred events.

See ::pending_interrupt? for more information.

Returns:

  • (Boolean) 


2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
 
# File 'thread.c', line 2076

static VALUE
rb_thread_pending_interrupt_p(int argc, VALUE *argv, VALUE target_thread)
{
    rb_thread_t *target_th = rb_thread_ptr(target_thread);

    if (!target_th->pending_interrupt_queue) {
	return Qfalse;
    }
    if (rb_threadptr_pending_interrupt_empty_p(target_th)) {
	return Qfalse;
    }
    if (rb_check_arity(argc, 0, 1)) {
        VALUE err = argv[0];
        if (!rb_obj_is_kind_of(err, rb_cModule)) {
            rb_raise(rb_eTypeError, "class or module required for rescue clause");
        }
        if (rb_threadptr_pending_interrupt_include_p(target_th, err)) {
            return Qtrue;
        }
        else {
            return Qfalse;
        }
    }
    else {
	return Qtrue;
    }
}

#priority ⇒ Integer

Returns the priority of thr. Default is inherited from the current thread which creating the new thread, or zero for the initial main thread; higher-priority thread will run more frequently than lower-priority threads (but lower-priority threads can also run).

This is just hint for Ruby thread scheduler. It may be ignored on some platform.

Thread.current.priority   #=> 0

Returns:



3617
3618
3619
3620
3621
 
# File 'thread.c', line 3617

static VALUE
rb_thread_priority(VALUE thread)
{
    return INT2NUM(rb_thread_ptr(thread)->priority);
}

#priority=(integer) ⇒ Object

Sets the priority of thr to integer. Higher-priority threads will run more frequently than lower-priority threads (but lower-priority threads can also run).

This is just hint for Ruby thread scheduler. It may be ignored on some platform.

count1 = count2 = 0
a = Thread.new do
      loop { count1 += 1 }
    end
a.priority = -1

b = Thread.new do
      loop { count2 += 1 }
    end
b.priority = -2
sleep 1   #=> 1
count1    #=> 622504
count2    #=> 5832



3650
3651
3652
3653
3654
3655
3656
3657
3658
3659
3660
3661
3662
3663
3664
3665
3666
3667
3668
3669
3670
 
# File 'thread.c', line 3650

static VALUE
rb_thread_priority_set(VALUE thread, VALUE prio)
{
    rb_thread_t *target_th = rb_thread_ptr(thread);
    int priority;

#if USE_NATIVE_THREAD_PRIORITY
    target_th->priority = NUM2INT(prio);
    native_thread_apply_priority(th);
#else
    priority = NUM2INT(prio);
    if (priority > RUBY_THREAD_PRIORITY_MAX) {
	priority = RUBY_THREAD_PRIORITY_MAX;
    }
    else if (priority < RUBY_THREAD_PRIORITY_MIN) {
	priority = RUBY_THREAD_PRIORITY_MIN;
    }
    target_th->priority = (int8_t)priority;
#endif
    return INT2NUM(target_th->priority);
}

#raise ⇒ Object #raise(string) ⇒ Object #raise(exception[, string [, array]]) ⇒ Object

Raises an exception from the given thread. The caller does not have to be thr. See Kernel#raise for more information.

Thread.abort_on_exception = true
a = Thread.new { sleep(200) }
a.raise("Gotcha")

This will produce:

prog.rb:3: Gotcha (RuntimeError)
	from prog.rb:2:in `initialize'
	from prog.rb:2:in `new'
	from prog.rb:2



2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
 
# File 'thread.c', line 2417

static VALUE
thread_raise_m(int argc, VALUE *argv, VALUE self)
{
    rb_thread_t *target_th = rb_thread_ptr(self);
    const rb_thread_t *current_th = GET_THREAD();

    threadptr_check_pending_interrupt_queue(target_th);
    rb_threadptr_raise(target_th, argc, argv);

    /* To perform Thread.current.raise as Kernel.raise */
    if (current_th == target_th) {
	RUBY_VM_CHECK_INTS(target_th->ec);
    }
    return Qnil;
}

#report_on_exception ⇒ Boolean

Returns the status of the thread-local “report on exception” condition for this thr.

The default value when creating a Thread is the value of the global flag Thread.report_on_exception.

See also #report_on_exception=.

There is also a class level method to set this for all new threads, see ::report_on_exception=.

Returns:

  • (Boolean) 


2927
2928
2929
2930
2931
 
# File 'thread.c', line 2927

static VALUE
rb_thread_report_exc(VALUE thread)
{
    return rb_thread_ptr(thread)->report_on_exception ? Qtrue : Qfalse;
}

#report_on_exception=(boolean) ⇒ Boolean

When set to true, a message is printed on $stderr if an exception kills this thr. See ::report_on_exception for details.

See also #report_on_exception.

There is also a class level method to set this for all new threads, see ::report_on_exception=.

Returns:

  • (Boolean) 


2947
2948
2949
2950
2951
2952
 
# File 'thread.c', line 2947

static VALUE
rb_thread_report_exc_set(VALUE thread, VALUE val)
{
    rb_thread_ptr(thread)->report_on_exception = RTEST(val);
    return val;
}

#run ⇒ Object

Wakes up thr, making it eligible for scheduling.

a = Thread.new { puts "a"; Thread.stop; puts "c" }
sleep 0.1 while a.status!='sleep'
puts "Got here"
a.run
a.join

This will produce:

a
Got here
c

See also the instance method #wakeup.



2586
2587
2588
2589
2590
2591
2592
 
# File 'thread.c', line 2586

VALUE
rb_thread_run(VALUE thread)
{
    rb_thread_wakeup(thread);
    rb_thread_schedule();
    return thread;
}

#safe_level ⇒ Integer

Returns the safe level.

This method is obsolete because $SAFE is a process global state. Simply check $SAFE.

Returns:



3113
3114
3115
3116
3117
3118
 
# File 'thread.c', line 3113

static VALUE
rb_thread_safe_level(VALUE thread)
{
    rb_warn("Thread#safe_level will be removed in Ruby 3.0");
    return UINT2NUM(GET_VM()->safe_level_);
}

#set_trace_func(proc) ⇒ Proc #set_trace_func(nil) ⇒ nil

Establishes proc on thr as the handler for tracing, or disables tracing if the parameter is nil.

See Kernel#set_trace_func.

Overloads:

  • #set_trace_func(proc) ⇒ Proc

    Returns:

  • #set_trace_func(nil) ⇒ nil

    Returns:

    • (nil) 


569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
 
# File 'vm_trace.c', line 569

static VALUE
thread_set_trace_func_m(VALUE target_thread, VALUE trace)
{
    rb_execution_context_t *ec = GET_EC();
    rb_thread_t *target_th = rb_thread_ptr(target_thread);

    rb_threadptr_remove_event_hook(ec, target_th, call_trace_func, Qundef);

    if (NIL_P(trace)) {
	return Qnil;
    }
    else {
	thread_add_trace_func(ec, target_th, trace);
	return trace;
    }
}

#status ⇒ String, ...

Returns the status of thr.

"sleep"

Returned if this thread is sleeping or waiting on I/O

"run"

When this thread is executing

"aborting"

If this thread is aborting

false

When this thread is terminated normally

nil

If terminated with an exception.

a = Thread.new { raise("die now") }
b = Thread.new { Thread.stop }
c = Thread.new { Thread.exit }
d = Thread.new { sleep }
d.kill                  #=> #<Thread:0x401b3678 aborting>
a.status                #=> nil
b.status                #=> "sleep"
c.status                #=> false
d.status                #=> "aborting"
Thread.current.status   #=> "run"

See also the instance methods #alive? and #stop?

Returns:



3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
 
# File 'thread.c', line 3027

static VALUE
rb_thread_status(VALUE thread)
{
    rb_thread_t *target_th = rb_thread_ptr(thread);

    if (rb_threadptr_dead(target_th)) {
	if (!NIL_P(target_th->ec->errinfo) &&
	    !FIXNUM_P(target_th->ec->errinfo)) {
	    return Qnil;
	}
	else {
	    return Qfalse;
	}
    }
    else {
	return rb_str_new2(thread_status_name(target_th, FALSE));
    }
}

#stop? ⇒ Boolean

Returns true if thr is dead or sleeping.

a = Thread.new { Thread.stop }
b = Thread.current
a.stop?   #=> true
b.stop?   #=> false

See also #alive? and #status.

Returns:

  • (Boolean) 


3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
 
# File 'thread.c', line 3086

static VALUE
rb_thread_stop_p(VALUE thread)
{
    rb_thread_t *th = rb_thread_ptr(thread);

    if (rb_threadptr_dead(th)) {
	return Qtrue;
    }
    else if (th->status == THREAD_STOPPED ||
	     th->status == THREAD_STOPPED_FOREVER) {
	return Qtrue;
    }
    else {
	return Qfalse;
    }
}

#exit ⇒ Object #kill ⇒ Object #terminate ⇒ Object

Terminates thr and schedules another thread to be run, returning the terminated Thread. If this is the main thread, or the last thread, exits the process.



2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
 
# File 'thread.c', line 2445

VALUE
rb_thread_kill(VALUE thread)
{
    rb_thread_t *th = rb_thread_ptr(thread);

    if (th->to_kill || th->status == THREAD_KILLED) {
	return thread;
    }
    if (th == th->vm->main_thread) {
	rb_exit(EXIT_SUCCESS);
    }

    thread_debug("rb_thread_kill: %p (%"PRI_THREAD_ID")\n", (void *)th, thread_id_str(th));

    if (th == GET_THREAD()) {
	/* kill myself immediately */
	rb_threadptr_to_kill(th);
    }
    else {
	threadptr_check_pending_interrupt_queue(th);
	rb_threadptr_pending_interrupt_enque(th, eKillSignal);
	rb_threadptr_interrupt(th);
    }
    return thread;
}

#thread_variable?(key) ⇒ Boolean

Returns true if the given string (or symbol) exists as a thread-local variable.

me = Thread.current
me.thread_variable_set(:oliver, "a")
me.thread_variable?(:oliver)    #=> true
me.thread_variable?(:stanley)   #=> false

Note that these are not fiber local variables. Please see Thread#[] and Thread#thread_variable_get for more details.

Returns:

  • (Boolean) 


3579
3580
3581
3582
3583
3584
3585
3586
3587
3588
3589
3590
3591
3592
3593
3594
3595
3596
3597
3598
3599
3600
 
# File 'thread.c', line 3579

static VALUE
rb_thread_variable_p(VALUE thread, VALUE key)
{
    VALUE locals;
    ID id = rb_check_id(&key);

    if (!id) return Qfalse;

    if (LIKELY(!THREAD_LOCAL_STORAGE_INITIALISED_P(thread))) {
        return Qfalse;
    }
    locals = rb_thread_local_storage(thread);

    if (rb_hash_lookup(locals, ID2SYM(id)) != Qnil) {
        return Qtrue;
    }
    else {
        return Qfalse;
    }

    return Qfalse;
}

#thread_variable_get(key) ⇒ Object?

Returns the value of a thread local variable that has been set. Note that these are different than fiber local values. For fiber local values, please see Thread#[] and Thread#[]=.

Thread local values are carried along with threads, and do not respect fibers. For example:

Thread.new {
  Thread.current.thread_variable_set("foo", "bar") # set a thread local
  Thread.current["foo"] = "bar"                    # set a fiber local

  Fiber.new {
    Fiber.yield [
      Thread.current.thread_variable_get("foo"), # get the thread local
      Thread.current["foo"],                     # get the fiber local
    ]
  }.resume
}.join.value # => ['bar', nil]

The value “bar” is returned for the thread local, where nil is returned for the fiber local. The fiber is executed in the same thread, so the thread local values are available.

Returns:



3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
 
# File 'thread.c', line 3420

static VALUE
rb_thread_variable_get(VALUE thread, VALUE key)
{
    VALUE locals;

    if (LIKELY(!THREAD_LOCAL_STORAGE_INITIALISED_P(thread))) {
        return Qnil;
    }
    locals = rb_thread_local_storage(thread);
    return rb_hash_aref(locals, rb_to_symbol(key));
}

#thread_variable_set(key, value) ⇒ Object

Sets a thread local with key to value. Note that these are local to threads, and not to fibers. Please see Thread#thread_variable_get and Thread#[] for more information.



3441
3442
3443
3444
3445
3446
3447
3448
3449
3450
3451
3452
 
# File 'thread.c', line 3441

static VALUE
rb_thread_variable_set(VALUE thread, VALUE id, VALUE val)
{
    VALUE locals;

    if (OBJ_FROZEN(thread)) {
        rb_frozen_error_raise(thread, "can't modify frozen thread locals");
    }

    locals = rb_thread_local_storage(thread);
    return rb_hash_aset(locals, rb_to_symbol(id), val);
}

#thread_variables ⇒ Array

Returns an array of the names of the thread-local variables (as Symbols).

thr = Thread.new do
  Thread.current.thread_variable_set(:cat, 'meow')
  Thread.current.thread_variable_set("dog", 'woof')
end
thr.join               #=> #<Thread:0x401b3f10 dead>
thr.thread_variables   #=> [:dog, :cat]

Note that these are not fiber local variables. Please see Thread#[] and Thread#thread_variable_get for more details.

Returns:



3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
 
# File 'thread.c', line 3547

static VALUE
rb_thread_variables(VALUE thread)
{
    VALUE locals;
    VALUE ary;

    ary = rb_ary_new();
    if (LIKELY(!THREAD_LOCAL_STORAGE_INITIALISED_P(thread))) {
        return ary;
    }
    locals = rb_thread_local_storage(thread);
    rb_hash_foreach(locals, keys_i, ary);

    return ary;
}

#to_s ⇒ String Also known as: inspect

Dump the name, id, and status of thr to a string.

Returns:



3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
 
# File 'thread.c', line 3170

static VALUE
rb_thread_to_s(VALUE thread)
{
    VALUE cname = rb_class_path(rb_obj_class(thread));
    rb_thread_t *target_th = rb_thread_ptr(thread);
    const char *status;
    VALUE str, loc;

    status = thread_status_name(target_th, TRUE);
    str = rb_sprintf("#<%"PRIsVALUE":%p", cname, (void *)thread);
    if (!NIL_P(target_th->name)) {
        rb_str_catf(str, "@%"PRIsVALUE, target_th->name);
    }
    if ((loc = threadptr_invoke_proc_location(target_th)) != Qnil) {
        rb_str_catf(str, " %"PRIsVALUE":%"PRIsVALUE,
                    RARRAY_AREF(loc, 0), RARRAY_AREF(loc, 1));
        rb_gc_force_recycle(loc);
    }
    rb_str_catf(str, " %s>", status);

    return str;
}

#value ⇒ Object

Waits for thr to complete, using #join, and returns its value or raises the exception which terminated the thread.

a = Thread.new { 2 + 2 }
a.value   #=> 4

b = Thread.new { raise 'something went wrong' }
b.value   #=> RuntimeError: something went wrong

Returns:



1173
1174
1175
1176
1177
1178
1179
 
# File 'thread.c', line 1173

static VALUE
thread_value(VALUE self)
{
    rb_thread_t *th = rb_thread_ptr(self);
    thread_join(th, 0);
    return th->value;
}

#wakeup ⇒ Object

Marks a given thread as eligible for scheduling, however it may still remain blocked on I/O.

Note: This does not invoke the scheduler, see #run for more information.

c = Thread.new { Thread.stop; puts "hey!" }
sleep 0.1 while c.status!='sleep'
c.wakeup
c.join
#=> "hey!"



2539
2540
2541
2542
2543
2544
2545
2546
 
# File 'thread.c', line 2539

VALUE
rb_thread_wakeup(VALUE thread)
{
    if (!RTEST(rb_thread_wakeup_alive(thread))) {
	rb_raise(rb_eThreadError, "killed thread");
    }
    return thread;
}